
FMS 5.8GHz Analog FPV System is a simple and user-friendly entry-level FPV setup.
What's in the box:
- 1 x 5.8GHz 4.3-inch FPV Monitor + Antenna
- 1 x 5.8GHz All-In-One Analog Camera
- 1 x Camera Housing With Mounting Base
- 1 x Monitor Mount
- 1 x 3.7V Battery (For Camera Use)
- 1 x 3.7V Battery Charger
- 1 x Hook-and-Loop Tape
- 1 x Adjustable Zip Ties
- 1 x Manual
How to Set Up:
1. Securely mount the camera on your RC vehicle (drone/car/boat) using the included hook-and-loop straps or zip ties.
2. Install the antenna before powering on the monitor, then use the auto-scan function to find the frequency.
3. Begin your FPV adventure!
Q&A:
1. Why doesn’t the image look as clear as I expected?
Analog video transmission has lower resolution compared to HD systems, resulting in less sharpness. However, it offers low latency, making it great for close-range FPV (within 100 meters).
2. Why is the screen flickering and showing static (snow)?
This could be due to environmental interference. Try moving the screen further away from Wi-Fi routers or the transmitter. You can also switch the video transmission band or channel to see if that helps (check the manual for how to change the channel).
3. Why does the image look so blurry?
The camera’s focus might not be properly adjusted. Try rotating the lens clockwise or counterclockwise until the image comes into sharp focus.
4. What is the operating endurance of the monitor and camera?
When fully charged, the monitor lasts up to 3 hours, while the camera provides up to 20 minutes of use.
5. What’s the signal range of the 5.8GHz Analog FPV System?
The effective range is up to 150 meters in open areas without interference.
FPV Monitor Specification:
|
|
4.3 inches |
| Resolution | 480×272 pixels |
| Aspect Ratio | 16:9 |
| Brightness | 500 cd/m² |
| Input Format | NTSC/PAL Auto-Switch |
| AV Interface | 3.5mm analog video |
| Operating Voltage | 5V DC |
| Charging Port | Micro-USB 5V/2A |
| Battery Capacity | 3.7V 2500mAh Li-ion |
| Frequency Range | 4990-5945 MHz |
| Channels | 56 channels |
| Sensitivity | -90dBm |
| Antenna Connector | RP-SMA (inner pin) |
| Dimensions | 123×85×26 mm |
| OSD Display | Signal strength/Battery/CH |
| Auto-Scan | One-button frequency search |
Camera Specification:
|
|
Copper tube |
| Working Current | 220mA |
| Voltage Range | 2.5-5.5V (5V typ.) |
| Dimensions | 13.5×15.9×17.2mm |
| Weight | 3.6g |
| RF Power | 25mW |
| Channels | 48CH |
| Camera | 120° FOV, 600TVL |
| Lens | f=1.4mm |
| Video Standard | PAL |
Spare parts may be available upon request. Contact support@fairrc.com to learn more.
Shipping
FairRC ships products to the following global destinations:
Asia : Japan, Malaysia, Singapore, South Korea, Taiwan, Thailand, Philippines, Lebanon, HongKong Macao.
Europe :Austria, Belgium, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Lithuania, Luxembourg, Netherlands, Poland, Romania, Portugal (Except: Açores), Spain, Norway, Sweden, Switzerland, United Kingdom, Czech Republic, Malta.
North America : Canada, Mexico, United States (We do not ship airplanes, some 1/12 cars, 1/6 &1/10 cars to the state of AK, HI, GU & PR because the shipping fee cost a lot.)
Oceania : Australia, New Zealand
It depends on where you are. Order processing time takes 1-3 business days.
If you are in the United States or Canada, we give priority to delivery at the local warehouse, which will take about 3-5 days. If the products are not available at local warehouse, then we will ship at the China warehouse, which will take 8-15 days.
Delivery to other countries will take 8-15 days.
At this time we only ship to the US. We recently built a warehouse in Canada, and it only takes 3-5 days for all cars and airplanes to be delivered to the local area. We will continue to build our own warehouse around the world, including Europe, Asia, ect,.
We only ship these two sizes to the US and Canada because they are too bulky to ship from our warehouse in China.





