The FMS 1400mm T28 is going to get its fourth remarkable upgrade after it was launched three years ago. The 1400mm T28 V4 is coming!
No matter whether you had an FMS T28 or not before, the coming V4 is full of surprises. First of all, the foam ratio has been upgraded from EPO 40 to the lighter and larger EPO 52, which alleviates the airplane's weight, without weakening the airplane. Moreover, the original oil paint which has an unavoidable negative side effect of corrosion has been replaced by the latest environmental water-based paint.
Let’s take a look at more upgrades below. The latest FMS multi-connector is also used for V4, which makes the assembly easy and simple while leaving the wires orderly and user-friendly. The 1400mm T28 V4 adopts the new design of ball linkage to remove the clearance and hit an accurate flight. The updated 4258 motor drives the power and speed around 30% higher. Both front and rear landing gears are metal, with a shock absorption function for hard landings. In terms of construction and performance, the 1400mm T28 V4 is totally different to the old versions. It is certain that the latest version greatly enhances flight appeal. Don't miss out on this thrilling experience.
RTF (Ready to fly): A RTF plane includes the plane with the radio, receiver, battery, charger, motor, servos, retracts (if it has) and ESC already in place.
PNP (Plug and Play) - A PNP foam plane includes the plane with the motor, servos, retracts (if it has) and ESC already in place. Battery and charger are not included. Radio and receiver are not included.
KIT: A KIT plane is an airframe only. It does not include any motor, ESC, or servos (though usually includes servoless retracts on planes with retracts).
· New upgraded 4258-KV650 motor and 70A ESC
· New technology lighter EPO foam
· New water painting for environmental protection
· Shock absorbing metal oleo front and main landing gear struts
· Screw-in servo pockets. No more glued in servos! A bad servo can be replaced with 2 screws
· Digital metal gear servos throughout
· Ball links on all control surfaces
· Easy, single wire quick connectors to remove the wings
· Slide out battery tray for easy battery changes
|Flying Weight||Around 2450g|
|Motor Size||4258-KV650 Powerful Out runner Brushless Motor|
|ESC||70A Brushless ESC with 5A SBEC|
|Servo||9g Servo x 2, 17g Servo x 5|
|CG (center of gravity)||80-85mm (From Leading Edge)|
|Prop Size||13*9 3 Blade Propeller|
|Recommended Battery||Li-Po 14.8V 2600mAh|
|Approx. Flying Duration||6 minutes|
|Minimum Age Recommendation||14+|
|Assembly Time||20 minutes|
ACCESSORIES RELATED TO THIS PRODUCT:
We ship to most countries of the world except Ukraine, Russia, Belarus and Czech Republic. Shipping costs will apply and will be added at checkout.
It depends on where you are. Order processing time takes 1-3 business days.
If you are in the United States or Canada, we give priority to delivery at the local warehouse, which will take about 3-5 days. If the products are not available at local warehouse, then we will ship at the Chinese warehouse, which will take 8-15 days.
Delivery to other countries will take 8-15 days.
At this time we only ship to the US. We recently built a warehouse in Canada, and it only takes 3-5 days for all cars and planes to be delivered to the local area. We will continue to build our own warehouses around the world, including Europe, Asia, etc., so stay tuned...
We only ship these two sizes to the US and Canada because they are too bulky to ship from our warehouse in China.